Three New and More to come Part# VC9928 DODGE Script 1970 Dart trunk or 1968 Polara trunk emblem. Reproduction Dodge script emblem is made of diecast metal as original. Features chrome finish with satin black accents. Includes mounting hardware. O.E. part number 2839928. Part# VC48078 THREE HUNDRED 1970 Chrysler 300 trunk lid or 1971 Chrysler 300 [ Read More ]
They have arrived. All New Tooling. 1971 Roadrunner Grille Bird Emblem. Select YEARONE® part# VC3513 These require a lot of hand paint work, have the correct Mopar part number and Pentastar on the backside and are licensed by MOPAR. Is your Mopar missing an emblem, or do you need to replace some tired emblems with a [ Read More ]
NEW Dash Speaker Grille Mounting Brackets for 3 Speaker Dash. 1970 to 1974 Mopar E bodies reproduction stamped steel dash speaker brackets for 3 speaker option. The bracket mounts to the underside of the dash pad with 4 screws and is what the speaker grilles attach to. Includes mounting hardware. Sold as a pair. YEARONE® [ Read More ]
NEW! YEARONE® Part# VC742T Adhesive backed 1970, 1972-1974 Challenger DODGE hood letters set. Reproduction Hood Letter set is for Dual Scoop Rallye Hoods, They were not used on Standard or Shaker Hoods. • On 1970-1974 models the letter spacing is approximately 3.5 inches center to center on each letter. The D was dead center, and all [ Read More ]
Chevrolet Truck Rubber Floor Mat Sets Designed, Assembled & Made in the USA. Aggressive well defined and sharp deep tread profiling helps trap dirt, sand, mud, debris, water, snow and ice. Innovative Sure-Grip backing helps hold mats in place and improve slip resistance. Click your model below and order at yearone.com today: 1967-1972 – C/10 [ Read More ]
You choose Blue or White. AC-Delco PF35 Tall Style Blue Oil Filter for 1963-1972 L6 and 1969-1972 GM V8 engines. Reproduction AC Delco PF35 oil filter with correct 6438384 part number and print on the filter. Includes retro box and is licensed by GM. Order Part# PF35 or for the case order part# PF35CASE. For [ Read More ]
NEW Reproduction emblems VC4654 1970 Super Bee Tail emblem. This emblem was originally installed onto the tail panel trim panel with the studs pressed to hold in place. This new emblem requires a hammer and a punch or a press to fasten it to the rear aluminum finish panel. Made In The USA. 3-3/4″ Wide [ Read More ]
YEARONE® added new emblems for Plymouth C-bodies. Made in the USA. Part# VC24233 1965-1967 and 1970-1971 Fury fender emblem. Reproduction diecast fender emblem features a bright chrome plated finish with satin black accents. 3 Pin, includes mounting hardware. Measures 5-1/8′ long by 2-1/2″ tall. Sold individually , 2 required per car. Part# VC4226 1965-1967 and 1970-1971 Fury III [ Read More ]
1972 Road Runner Grille emblem has arrived. Order part# VC3534 Reproduction grille emblem is made of chrome plated diecast and has satin black accents as original. Includes hardware. Made In The USA Is your Mopar missing an emblem, or do you need to replace some tired emblems with a new one? Shop YEARONE.com or [ Read More ]
NEW Vintage Air Gen 5 Complete Kit available at YEARONE. The Gen 5 is Vintage Air’s most powerful and intelligent climate control system. The Gen 5 uses an exclusive fully electronic microprocessor control system that eliminates cables or vacuum connections. Separate high-capacity copper parallel-flow heat coil and aluminum plate-and fin-cooling coils provide outstanding performance and instant [ Read More ]
